We at SERVPRO are mold remediation experts, and we have the proper tools and techniques necessary to properly remediate and even remove heavy mold staining. This photo shows the results of our mold stain remover after it is applied to wood sheathing in an attic. As can be seen, it is incredibly effective at removing the staining and making it look "Like it never even happened." 

SERVPRO was hired to inspect a room for mold infestation in this administrative facility in Willowbrook after rainwater had leaked in from the roof. This room contained double layer drywall inside and out, and mold was found in between each layer. Mold remediation protocols were created by our indoor environmental professional based on our findings. This involved setting up plastic containment around the room’s entrance with an air scrubber to prevent mold spores from escaping into the rest of the facility. Affected drywall and carpeting were then removed, followed by HEPA vacuuming and wiping all horizontal surfaces with an antimicrobial agent. After work was completed, a post-remediation verification was performed, which showed mold remediation was adequately performed.

Mold remediation requires containment in order to limit the spread of mold spores. This commercial property suffered extensive mold damage throughout the premises, which required a large amount of containment to protected unaffected areas from further mold damage. This photo shows the containment set up; notice the large green air scrubber attached, creating negative air pressure to prevent contaminated air from leaving the area. For this to work properly, the containment setup needs to be airtight.

At a quick glance, this kitchen seemed perfectly clean. Upon further inspection, however, there was indeed mold found growing inside the cabinet under the sink. As you look for mold in your property, be mindful of any dark and hidden spots underneath any water sources.

After mold was found underneath the flooring of this residential property, special care was taken by our technicians to set up a containment area in order to protect the rest of the house from further contamination. 

A kitchen leak went unnoticed, which resulted in a large mold infestation that caught the nose of the homeowner too late. A demo was needed, using HEPA filtered equipment to keep messy debris from circulating. Count on us to do it right.

Mold damage occurred in this apartment in Elk Grove due to a water leak. The unit was vacant, so the mold infestation had considerable time to develop. Our technicians successfully cut away and replaced ruined drywall on the first floor. 

A property owner was relocating out of state for work and trying to sell her house. Unfortunately, when the home inspector came, he found mold in her attic. The owner contacted us, and by the next afternoon, her house was mold-free. Using specialized equipment, our technicians successfully removed the mold and replaced the insulation. 

Excessive amounts of mold damage as shown in this home in Rolling Meadows may present health concerns. The property owner was anxious to have the unsightly growth analyzed and removed. We employed the latest equipment to detect the source of moisture and corrected the problem. Then we cleaned and treated the affected area of the wall and ceiling. Antifungal and antimicrobial treatments were applied to eliminate the potential for more mold colonies from forming.